My Introduction

My Introduction:

My name is Amy Bauco, my candidate number is 9013. I am part of group 1 and the other members of my group are Shayam Utting (9164) and Monica Aghadiuno (9365). To see my work please see the labels on the right hand side named AS Research and Planning, AS Construction and AS Evaluation. Our final opening sequence is shown below, along with a group photo next to it, on the right.

Our Film Opening Sequence

Our Film Opening Sequence:

Thursday, 5 March 2015

Construction Post 1: Our Production Kit

We used a variety of kit for filming our opening, including lights, a camera, microphone and other bits of equipment. Here are some pictures of our kit, and what is what.
The camera we used was a Canon Legria HF G30. We also had headphone with this to check the sound was right and there was no background noise. The mic we used was to help pick up on dialogue. The tripod enabled us to make the camera higher up and adjust the angles of shots.

This piece of kit is the clapperboard. We used this to keep control of our shots so we could easily work out which shot is which when watching them back.

These are the lights we used when shooting. We had to set them up in every location and adjust them to how we wanted the lighting for the shot. This was a hard job as we were not experts on lighting, but after a demonstration and some research, we got the hang of it. We also had a pair of gloves with these lights for safety purposes, as the lights get hot.
This is the extension chord which we used for the lights. As we had
problems with not having enough space in the bedroom for lights.
we had to adjust where they were. This was sometimes far away
from the plug, so we used one of these.

No comments:

Post a Comment